Dimensions | Load capacity | Limit speed |
Bearing designation |
||||||
D | d | B | L | L1 | M | in Movement . |
Co Resting. |
||
mm | mm | mm | mm | mm | mm | N | N | min.-1 | |
16 | 6 | 11 | 28 | 8 | M6 | 4850 | 6500 | 8500 | RKV 16 |
19 | 8 | 32 | 10 | M8 | 5500 | 7900 | 7000 | RKV 19 | |
22 | 10 | 12 | 36 | 12 | M10x1 | 6300 | 9100 | 6000 | RKV 22 |
26 | 7300 | 11300 | RKV 26 | ||||||
28,575 | 11,112 | 15,875 | 43 | 16 | M10 | 8400 | 11000 | 3000 | RKV 28,575 |
30 | 12 | 14 | 40 | 13 | M12x1,5 | 9500 | 14600 | 4500 | RKV 30 |
32 | 10000 | 15800 | RKV 32 | ||||||
35 | 16 | 18 | 52 | 17 | M 16x1,5 | 12800 | 23000 | 3400 | RKV 35 |
40 | 18 | 20 | 58 | 19 | M 18x1,5 | 14800 | 26500 | 2900 | RKV 40 |
47 | 20 | 24 | 66 | 21 | M20x1,5 | 20600 | 42000 | 2600 | RKV 47 |
52 | 22500 | 48000 | RKV 52 | ||||||
62 | 24 | 29 | 80 | 25 | M24x1,5 | 34000 | 76000 | 2200 | RKV 62 |
72 | 37000 | 85000 | RKV 72 | ||||||
80 | 30 | 35 | 100 | 32 | M30x1,5 | 49500 | 120000 | 1700 | RKV 80 |
90 | 30 | 35 | 100 | 32 | M30x1,5 | 53000 | 130000 | 1700 | RKV 90 |
Note:
As standard, the rollers are lubricated from the front (as shown in the picture). Only in this version are the rollers RKV 16, RKV 19, RKV 22 and RKV 26 manufactured. Rollers lubricated on the thread side are marked with the letter “G”, added at the end of the standard product (e.g. RKV 52G).
Characteristics:
Cam roller bearings are needle roller bearings consisting of a mandrel which is the inner raceway and a thick-walled outer ring.
Application:
Cam rollers are used for eccentrics, cams, guides, tappets, etc.
Delivery status:
Ready-to-install, filled with operating grease, do not wash.
Protected by maintenance oil, packed in corrosion inhibited anti-corrosion paper.